Paramtents
Numerical control FANUC/SIEMENS/MITSUBISHI
Control method Semi-closed loop control
Three axes linear guideway
Brand SINO
Packging & Delivery
Min Order1 piece
Briefing
Detailed
Product Introduction
TAPER
AXIS
RPM
TOOL CAPACITY
SVB series is the newly designed series of machine SINO cooperated together with Taiwan company. The design concept, assembly know how and inspection method all follow Taiwan machine standard.
Product Detailed Parameters
Table | Value | Unit |
---|---|---|
working size | 1600 x 700 | mm |
Max. load capacity | 1100 | kg |
Travel | Value | Unit |
---|---|---|
X travel | 1400 | mm |
Y travel | 700 | mm |
Z travel | 700 | mm |
Spindle | Value | Unit |
---|---|---|
Spindle nose taper | BT50 | |
Spindle speed (pulley) | 6000 | rpm |
Feed | Value | Unit |
---|---|---|
Rapid traverse rate | 24/24/20 | m/min |
ATC | Value | Unit |
---|---|---|
Number of tools | 24 | T |
Product Details Map
Pagoda type structure design and reinforcing ribs inside to ensure rigidity.;
Enclosed box type headstock with front end circular design to reduce weight compared with square design also the load of Z axis and the forward leaning phenomenon.
X/Z axis large 45/55mm roller linear guideway with 6 slides , Y axis has 4x45mm roller linear guideways with 8 sliders.
Servo motor directly coupled ball screw.
Intergrated ball screw housing improves rigidity and stability.Directly coupled servo motor eliminates any factors which will influence accuracy and efficiency.
All the ball screws, linear guideway, bearings are well lubricated in time and ration.
3 axes double nut ball screw (5012) with 4+3 bearings (4072)
Shoulder carrying tool magazine can ensure Z axis geometric accuracy and perfect stability, rigidity and the minimum deformation when column loaded with tool magazine weight.
double screw chip conveyor at two sides of machine inside which improves chip moving efficiency.
Standard equipped with inner side flushing system to remove scraps efficiently.
short nose spindle front 3 rear 2 bearings, direct driven and gear transimission spindle is optional
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.